Why Choose Elysium for Safety Switch (RCD) Installation
Elysium Electrical is a licensed Perth electrical contractor (Licence EC16523), a member of the Electrical Contractors Association of WA (ECA-WA), and an Accredited Master Electrician with Master Electricians Australia. We've completed 200+ electrical projects across Perth, including safety switch installations and upgrades for homes that don't yet have adequate RCD protection.
A safety switch is one of the cheapest, most effective pieces of electrical safety equipment you can install — and it's not something to leave to guesswork. Our licensed electricians test your switchboard, identify any circuits missing RCD protection, and install compliant safety switches correctly the first time.
Benefits of Safety Switch (RCD) Installation
- ✓ Protects your family against electric shock from faulty appliances, damaged cabling, or accidental contact with live parts
- ✓ Cuts power in milliseconds when a current leak is detected — far faster than a standard circuit breaker responds to a fault
- ✓ Reduces the risk of electrical fires caused by earth leakage faults
- ✓ Helps bring an older switchboard up to modern safety standards
- ✓ Can support insurance and compliance requirements for rental properties and renovations
- ✓ Low-cost, high-impact safety upgrade compared to most other electrical work
Why Professional Installation Matters
A safety switch only protects you if it's the right type, correctly wired to the right circuits, and actually tested once installed. Here's why a licensed install matters:
- ✓ Correct circuit coverage — power and lighting circuits generally need RCD protection, and we make sure nothing is left unprotected
- ✓ Compliance — installations are completed to Australian wiring standards, with a compliance certificate issued for the work
- ✓ Testing after install — every safety switch is tested to confirm it actually trips correctly, not just that it's wired in
- ✓ The right switchboard capacity — older switchboards may need assessment before adding safety switches
- ✓ No false confidence — a poorly installed safety switch can give the appearance of protection without actually providing it
Our Process
1. Free Site Assessment
We inspect your existing switchboard and circuits to see what safety switch protection is already in place, and what's missing.
2. Upfront Quote
You get a clear, upfront price before any work starts — no surprises on the day.
3. Scheduled Installation
Our licensed electricians install your new safety switches at a time that suits you.
4. Testing
Every safety switch is tested to confirm it trips correctly and responds within the required time.
5. Certificate & Handover
You receive a compliance certificate for the completed work and a full handover of what was installed.
Understanding Safety Switch Coverage
Not every safety switch setup is the same. A few things worth understanding about how they're typically arranged:
Whole-Board vs Circuit-Specific Protection
Some switchboards have a single main safety switch covering everything, while others use separate safety switches for individual circuits. Circuit-specific protection means a fault on one circuit doesn't cut power to the whole house.
Power and Lighting Circuits
Both power point circuits and lighting circuits generally need RCD protection — it's common for older homes to have safety switches on one but not the other.
Older Switchboards
Homes with older ceramic fuse or basic circuit-breaker switchboards often have no safety switch protection at all, or only partial coverage added at some point over the years.
Servicing Perth Metro
Elysium Electrical installs and upgrades safety switches for homes across the Perth metro area. See our full list of serviced suburbs or get in touch to confirm we cover your area.
Frequently Asked Questions
How many safety switches does my home need?
This depends on your switchboard and circuit layout. Our electricians assess your existing setup and recommend the right number and placement of safety switches to properly protect your power and lighting circuits.
What's the difference between a safety switch and a circuit breaker?
A circuit breaker protects your wiring from overload and short circuits. A safety switch (RCD) protects people from electric shock by detecting current leakage and cutting power almost instantly. Most modern switchboards use both together.
How long does safety switch installation take?
Most safety switch installations are completed within a few hours, depending on the number of circuits and the condition of your existing switchboard. We'll give you a clear time estimate as part of your upfront quote.
How do I know if my home already has safety switches?
You can usually check your switchboard for a test button labelled "T" or "Test" on individual switches. If you're not sure, we can inspect your switchboard and tell you exactly what protection is and isn't in place.
Should I test my safety switches myself?
Yes — safety switches have a test button and it's worth testing them periodically to confirm they trip correctly. If a safety switch fails to trip when tested, it should be inspected and replaced.
Protect Your Home with a Safety Switch Upgrade
Call Elysium Electrical or book online today.
Call 08 9930 2061 Request a Call Back